公司概述 - SAINT ENTERPRISE CO,. LTD.

SAINT ENTERPRISE CO,. LTD.

DAEGU, South Korea

5YRSSAINT ENTERPRISE CO,. LTD.

Melting & Casting

cast the slab with D.C casting by removing impurities and degassing and solidifying treatments after putting ingot into the melting furnace.

Hot Mill

To produce hot rolled coil with a thickness suitable for cold rolling process by hot rolling after scalping & soaking casted slab.

Cold Mill

To control such requirements that products should meet as strength, thckness, elongation and other mechanical properies by cold rolling.

Finishing

This is final process producing kinds of circle, coil, sheets through shearing, slitting and annealing the cold rolled coil.

Slitter Line

Slitter Line Coil Weight : 3 ton Thcikness : 0.3 - 4.8 mm Tolerance : + - 0.03 mm Output : 1,000 ton

产品名称	无	数量	验证

Melting furnace & Caster	Melting Furnace, Holding Furnace, Continuous Melting Device, Caster	4
Hot Mill	Slab Scalper, Hot Rolling Mill, Slab Homogenzing	6
Cold Mill	Cold Rolling Mill, Roll Grinder, Available Dimensions - Thickness : 0.5 ~ 4.8mm - Width : 500 ~ 780mm - Outside Diameter : max 1300mm	3
Finishing	Automatic Continuous Blanking Press, Annealing Furnace	9
Slitter line	Slitter machine	1
Shearing line	Shear machine	1

验证

厂房面积	10,000-30,000 square meters
工厂位置	DAEGU, KOREA
生产线数量	Above 10
合同制造	OEM Service Offered, Buyer Label Offered
年产值	Above US$100 Million

产品名称	台产	HighestEver	UnitType	验证

Aluminum Circle,Coil,Sheet

5500

6000

Metric Ton/Metric Tons

验证

生产线	主管	NO.算子	NO.直插 QC/QA	验证

验证

21 - 30 People